동결건조기(6L)(Freezer Dryer)
- 모델명 : 79340-10
- 제조사 : Labconco
- 용도 : 시료의 형태/활성을 유지 및 건조
- 사용료 : 시간당 3,000원
- 담당자 : 주임 / 신준호
- 상태 : -
- 연락처 : Tel : 031-888-6935 / Email : jhshin@gbsa.or.kr
| 주요사양 |
|---|
|
1. Upright stainless steel collector coil and chamber with stainless steel baffle capable of removing 2 liters of water in 24 hours and holding 6 liters of ice before defrosting.
2. Two 1/3 hp CFC-free and HCFC-free refrigeration systems, used in series, to cool collector to -84° C (-119° F). 3. Clear acrylic chamber lid, 3/4" thick, with neoprene gasket. 4. Brushed stainless steel and glacier white, epoxy-coated steel exterior with blue accents. 5. LCD that displays system operating parameters, set-up parameters and alarm messages. It may be user-configured to display vacuum in mBar, Pa or Torr and temperature in ° F or ° C. It also displays total number of hours of refrigeration operation and since the refrigeration was serviced and the total number of hours of vacuum pump operation and since the vacuum pump was serviced (in hours). 6. Red alarm light that flashes and beeper that sounds to indicate that an abnormal system event has occurred, including: power failure, improper line voltage supply, collector temperature rise above -40° C, service vacuum pump (after 1000 hours of vacuum use), and moisture in collector. Pressing the Menu Switch displays the alarm message on the LCD. 7. LED vacuum and temperature “waves” for at-a-glance display of relative system vacuum and collector temperature. 8. Moisture sensor that prevents refrigeration or vacuum start-up when moisture is detected in the collector chamber area. 9. Vacuum control valve that maintains setpoint vacuum level. 10. Vacuum break valve that bleeds air into the system when power to the freeze dryer or vacuum pump is shut off. If a power outage less than approximately 5 minutes occurs, the freeze dryer will restart and the refrigeration and vacuum system will resume operation once power is restored. If the power failure is more than approximately 5 minutes and the collector warms above safe limits, the freeze dryer will not automatically restart. 11. Rear-mounted RS-232 port to transmit data to a user-supplied computer. Transmission intervals may be user-configured for 10, 30, 60, 300 or 600 seconds. 12. Automatic start-up switch for collector cool-down and vacuum pull-down with manual override switches. 13. Hot gas defrost and switch. 14. Front-mounted, retractable, 9" collector drain hose. 15. 3" diameter stainless steel port for connection of drying accessories (sold separately). 16. Side-mounted power switch and rear-mounted electrical receptacle (for vacuum pump connection). 17. 3" diameter casters. 18. 3/4" OD vacuum connection, three feet of 3/4" ID vacuum hose and two clamps. 19. Overall dimensions : 31.8" w x 28.0" d x 36.3" h (80.8 cm x 71.1 cm x 92.1 cm). 20. Usable interior space : 14.0" w x 24.5" d x 22.0" h (35.6 cm x 62.2 cm x 55.9 cm) 21. Electrical Requirements : 220V, 60Hz, 5.5A 22. Ship weight : 150kg |
| 코멘트 |
| - |